Beschreibung
Modbus RTU Module / DC / 7 DIO / isol.
The M-7050 offers 7 channels for digital input and 8 channels for digital output, each of which are non-isolated. The M-7050 supports sink-type output using an NPN open collector and source-type input. All input channels are able to be used as 16-bit counters. There are options to enable both poweron and safe values. The M-7050D has 15 LED indicators for channel status monitoring. The hardware specifications for the M-7050 are the same as the I-7050 and both support the Modbus RTU and DCON protocols which can be configured via software.
● 8 Digital Outputs and 7 Digital Inputs
● Open Collector Output
● Non-isolated for all Channels
● Digital Input Channels Can Be Used As 16-bit Counters
● Configurable Power-on Value Settings
● Configurable Safe Value Settings
● Cost-effective
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C
Spezifikation
- System
- M-7050-G-CR
- Built-in Watchdog Timer
- Yes
- Interface
- M-7050-G-CR
- Bus
- RS-485
- Protocol
- DCON - Modbus RTU
- Max. Baud Rate
- 115200 bps
- Display
- -
- Digital Input
- M-7050-G-CR
- Digital Input
- 7
- Signal Type
- Source, non-isolated channel with common ground
- On Voltage Level
- +4 to +30V
- Off Voltage Level
- +1V max.
- Counter
- Channels: 7, Max. Counts: 16-bit, Max. Input Frequency: 100Hz, Min. Pulse Width: 5ms
- Isolation Voltage
- -
- Digital Output
- M-7050-G-CR
- Digital Outputs
- 8, Sink, NPN
- Current
- 30mA max.
- Voltage
- 30V max.
- Installation
- M-7050-G-CR
- Power Consumption
- -
- Dimensions (WxLxH)
- 72 mm x 123 mm x 35 mm
- Voltage Supply
- 10-30 VDC
- Operating Temperature
- -25 to 75°C
- Mounting
- Din Rail or Wall Mounting
- Color
- Grey
Filterkriterien
- Isoliert
- ja
- Host-Schnittstelle
- Seriell
- Eingabe Protokoll
- ModbusRTU/DCON
- Digital Out
- 08
- Digital In
- 07
- Hersteller
- ICPDAS
- Status
- Standard
- Zollnummer
- 85176200
- WEEE Nummer
- DE76344510