Beschreibung
16-channel Isolated DI Module
The I-7051 offers 16 channels for digital input, catering for both dry and wet contact, with an effective distance for dry contact of up to 500 meters. All channels not only feature Photocouple isolation, but can also be used as 16-bit counters. The I-7051D has 16 LED indicators for DI channel status monitoring. 4 kV ESD protection and 3750 Vrms intra-module isolation are standard. The hardware specifi cations for the M-7051 are the same as the I-7051 and both support the Modbus RTU and DCON protocols which can be confi gured via software.
● Dry Contact and Wet Contact Selectable Via Wire Connections
● Photocouple Isolation
● Long Effective Distance
● All Channels Can Be Used As 16-bit Counters
● 4 kV ESD Protection
● 3750 Vrms Isolation Voltage
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C
Spezifikation
- Model
- I-7051
- Digital Input/Counter
- Channels
- 16
- Type
- Dry Contact
- Source
- Wet Contact
- Sink/Source
- Wet Contact
- On Voltage Level
- +10 ~ 50 VDC
- Off Voltage Level
- +4 VDC Max.
- Dry Contact
- On Voltage Level
- Close to GND
- Off Voltage Level
- Open
- Effective Distance
- 500 m Max.
- for Dry Contact
- Counters
- Max. Count
- 65535 (16-bit)
- Max. Input
- 100 Hz
- Frequency
- Min. Pulse Width
- 5 ms
- Input Impedance
- 10 KΩ
- Channel-to-Channel Isolation
- -
- Overvoltage Protection
- ±70 VDC
- Model
- I-7051
- Communication
- Interface
- RS-485
- Bias Resistor
- No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
- Format
- (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
- Baud Rate
- 1200 ~ 115200 bps
- Protocol
- DCON
- Dual Watchdog
- Yes, Module (1.6 Seconds), Communication (Programmable)
- LED Indicators/Display
- System LED Indicator
- Yes, 1 LED as Power/Communication Indicator
- I/O LED Indicators
- -
- 7-Segment LED Display
- -
- Isolation
- Intra-Module Isolation, Field-to-Logic
- 3750 VDC
- EMS Protection
- ESD (IEC 61000-4-2)
- ±4 kV Contact for each Terminal
- ±8 kV Air for Random Point
- EFT (IEC 61000-4-4)
- ±4 kV for Power Line
- Surge (IEC 61000-4-5)
- ±3 kV for Power Line
- Power
- Reverse Polarity Protection
- Yes
- Input Range
- 10 ~ 30 VDC
- Consumption
- 0.3 W
- Mechanical
- Dimensions (W x L x H)
- 72 mm x 123 mm x 35 mm
- Installation
- DIN-Rail or Wall Mounting
- Environment
- Operating Temperature
- -25 ~ +75°C
- Storage Temperature
- -40 ~ +85°C
- Humidity
- 10 ~ 95% RH, Non-condensing
Filterkriterien
- Isoliert
- ja
- Host-Schnittstelle
- Seriell
- Eingabe Protokoll
- DCON
- Digital In
- 16
- Hersteller
- ICPDAS
- Status
- Standard
- Zollnummer
- 85176200
- WEEE Nummer
- DE 76344510