IGS-P9164FX-SS-SC-LV

Beschreibung

IGS-P9164FX-SS-SC-LV

Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, low-voltage power inputs

IGS-P9164 series are IEC 61850-3 managed redundant ring Ethernet switches. These switches are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IGS-P9164GF series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x1000Base-X optical fiber port with SC connector. IGS-P9164GFX series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x100Base-FX optical fiber port with SC connector. IGS-P9164GC series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4xGigabit combo ports with SFP socket. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75 oC. IGS-P9164GF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.

● Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
● Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
● Open-Ring support the other vendor’s ring technology in open architecture
● O-Chain allow multiple redundant network rings
● Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
● Support IEEE 1588v2 clock Synchronization
● Support IPV6 new internet protocol version
● Support Modbus TCP protocol
● Provided HTTPS/SSH protocol to enhance network security
● Support IEEE 802.3az Energy-Efficient Ethernet technology
● Support SMTP client and NTP server protocol
● Support LLDP Protocol
● Rigid IP-30 housing design
● DIN-Rail and wall mounting enabled
● Support IP-based bandwidth management
● Support application-based QoS management
● Support Device Binding security function
● Support DOS/DDOS auto prevention
● IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
● Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
● Support ACL, TACACS+ and 802.1x User Authentication for security
● Support 9.6K Bytes Jumbo Frame
● Support DBU-01 backup unit to quickly backup/restore configuration
● Multiple notification for warning of unexpected event
● Support DBU-01 backup unit device to quickly backup/restore configuration
● Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration

Spezifikation

Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX: 16
Gigabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port: -
Fiber Ports Number: 4
Fiber Ports Standard: 100Base-FX
Fiber Mode: Single-mode
Fiber Diameter (μm): 9/125 µm
Fiber Optical Connector: SC
Typical Distance (km): 30 Km
Wavelength (nm): 1310 nm
Max. Output Optical Power (dBm): -8 dbm
Min. Output Optical Power (dBm): -15 dbm
Max. Input Optical Power(Saturation): 0 dbm
Min. Input Optical Power (Sensitivity): -34 dbm
Link Budget (dB): 19 db
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3z for 1000Base-X; IEEE 802.3ab for 1000Base-T; IEEE 802.3ad for LACP (Link Aggregation Control Protocol ); IEEE 802.3x for Flow control; IEEE 802.3ad for LACP (Link Aggregation Control Protocol ); IEEE 802.1D for STP (Spanning Tree Protocol); IEEE 802.1p for COS (Class of Service); IEEE 802.1Q for VLAN Tagging; IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol); IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol); IEEE 802.1x for Authentication; IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table: 8k
Packet Buffer: 4Mbits
Priority Queues: 8
Processing: Store-and-Forward
Switch Properties: Switching latency: 7 us; Switching bandwidth: 40Gbps; Max. Number of Available VLANs: 4095; VLAN ID Range : 1 to 4094; IGMP multicast groups: 128 for each VLAN; Port rate limiting: User Define
Jumbo Frame: up to 9.6K Bytes
Security Feature: Device Binding security feature; Enable/disable ports, MAC based port security; Port based network access control (802.1x); VLAN (802.1Q ) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security; Https / SSH enhance network security
Software Features: STP/RSTP/MSTP (IEEE 802.1D/w/s); Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units; TOS/Diffserv supported; Quality of Service (802.1p) for real-time traffic; VLAN (802.1Q) with VLAN tagging and GVRP supported; IGMP Snooping; IP-based bandwidth management; Application-based QoS management; DOS/DDOS auto prevention; Port configuration, status, statistics, monitoring, security; DHCP Server/Client/Relay; SMTP Client; Modbus TCP; NTP server
Network Redundancy: O-Ring; Open-Ring; O-Chain; MRP; Fast Recovery; MSTP (RSTP/STP compatible)
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator: Green : Power LED x 3
Ring Master Indicator (R.M.): Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring): Green : Indicates that the system operating in O-Ring mode; Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault): Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 Port Indicator: Green LED for Link/Act indicator.; Dual color LED for speed indicator : Green for 1000Mbps, Amber for 100Mbps, Off light for 10Mbps
1000Base-X Fiber Port Indicator: Green for port Link/Act. (for IGS-P9164GF series)
100Base-FX Fiber Port Indicator: Green for port Link/Act. (for IGS-P9164FX series)
100/1000Base-X SFP Port Indicator: Green for port Link/Act. (for IGS-P9164GC series)
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC on 3-pin terminal block
Power
Redundant Input Power: LV model : Dual power inputs with 12~48VDC on dual 2-pin terminal block; HV model : Dual power inputs with 85~264VAC/88~373VDC on dual 3-pin terminal block
Power Consumption (Typ.): LV : 21Watts; HV : 19.3Watts
Overload Current Protection: Present
Reverse Polarity Protection: Present
Physical Characteristics
Enclosure: IP-30
Dimensions (W x D x H): 115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.3 x 6.06 inch)
Weight (g): LV Model : 1769 g; HV Model : 2205 g
Environmental
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: -40 to 75oC (-40 to 167oF )
Operating Humidity: 5% to 95% Non-condensing