IGS-9122GPM

Beschreibung

EN50155 modular managed Gigabit Ethernet switch with 12x10/100/1000Base-T(X) and 100/1000Base-X, SFP socket, 3 module extender slots

IGS-9122GPM is Din-Rail modular managed redundant ring Ethernet switch with 12x10/100/1000Base-T(X) and 2x100/1000Base-X SFP ports. Also, it supports 3 slots for install switch module to expander Ethernet ports. It is hot-swappable so there is no need to power off switch while replace the module. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), O-Chain, MRP, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75 oC. IGS-9122GPM can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet rolling stock application.

● Modular designed and Hot-swappable make network planning easier
● Support O-Ring (recovery time < 30ms over 250 units of Gigabit Ethernet and ● O-Chain allow multiple redundant network rings
● Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
● Support IEEE 1588v2 clock Synchronization
● Support IPv6 new internet protocol version
● Support Modbus TCP protocol
● Provided HTTPS/SSH protocol to enhance network security
● Support IEEE 802.3az Energy-Efficient Ethernet technology
● Support NTP server protocol
● Support IP-based bandwidth management
● Support application-based QoS management
● Support Device Binding security function
● Support DOS/DDOS auto prevention
● IGMP v1/v2/v3 (IGMP snooping support) and GMRP for filtering multicast traffic
● Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
● Support port mirror function to monitor port data
● Support ACL and 802.1x User Authentication for security
● Support 9.6K Bytes Jumbo Frame
● Support DBU-01 backup unit device to quickly backup/restore configuration
● Event notification through Syslog, Email, SNMP trap, and Relay Output
● Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
● Support LLDP Protocol
● Support dual power inputs for power redundancy
● Din-Rail enabled and fan-less design
● Modular designed and Hot-swappable make network planning easier
● Support O-Ring(recovery time < 30ms over 250 units of Gigabit Ethernet and ● O-Chain allow multiple redundant network rings
● Supportstandard IEC 62439-2 MRP (Media Redundancy Protocol) function
● Support IEEE 1588v2 clock Synchronization

Spezifikation

Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX: 12
100/1000Base-X SFP Ports: 2
Module Slot Number: 3 (support 4x1G combo / 4x1G Fiber / 4x100Mbps Fiber module)
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3ab for 1000Base-T; IEEE 802.z for 1000Base-X; IEEE 802.3ae for 10Gigabit Ethernet; IEEE 802.3x for Flow control; IEEE 802.3ad for LACP (Link Aggregation Control Protocol ); IEEE 802.1p for COS (Class of Service); IEEE 802.1Q for VLAN Tagging; IEEE 802.1D for STP (Spanning Tree Protocol); IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol); IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol); IEEE 802.1x for Authentication; IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table: 8k
Priority Queues: 8
Processing: Store-and-Forward
Switch Properties: Switching latency: 7 us; Switching bandwidth: 52Gbps; Max. Number of Available VLANs: 4095; VLAN ID Range: 1 to 4094; IGMP multicast groups: 128 for each VLAN; Port rate limiting: User Define
Jumbo Frame: Up to 9.6K Bytes
Security Features: Device Binding security feature; Enable/disable ports, MAC based port security; Port based network access control (802.1x); MAC-based authentication; MAC address limit; VLAN (802.1Q ) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security; Https / SSH enhance network security; Web and CLI authentication and authorization; IP source guard
Software Features: IEEE 1588v2 clock synchronization; IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static); Multiple Registration Protocol (MRP); MSTP (RSTP/STP compatible); Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units; TOS/Diffserv supported; Quality of Service (802.1p) for real-time traffic; VLAN (802.1Q) with VLAN tagging; IGMP v2/v3 Snooping; IP-based bandwidth management; Application-based QoS management; DOS/DDOS auto prevention; Port configuration, status, statistics, monitoring, security; DHCP Server/Client; DHCP Relay; Modbus TCP; DNS client proxy; SMTP Client; NTP server
Network Redundancy: O-Ring; O-Chain; MRP; Fast Recovery; MSTP (RSTP/STP compatible)
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 (support DBU-01 backup unit)
LED Indicators
System Ready Indicator (PWR): Green: Indicates that the system ready. The LED is blinking when the system is upgrading firmware.
Power Indicator (PWR1 / PWR2): Green: Power LED x 2
Ring Master Indicator (R.M.): Green: Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring): Green: Indicates that the system operating in O-Ring mode; Green Blinking: Indicates that the Ring is broken.
Fault Indicator (Fault): Amber: Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 Port Indicator: Green for Link/Act indicator.; Dual color LED for speed indicator : Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps
100/1000Base-X SFP Port Indicator: Green for Link/Act indicator
Fault Contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Redundant power input modular: Dual 12~48VDC power inputs at terminal block
Power consumption (Typ.): TBD
Overload Current Protection: Present
Physical Characteristics
Enclosure: IP-30
Dimensions (W x D x H): 184 (W) x 155 (D) x 150 (H) mm (7.24x6.1x5.9 inch)
Weight (g): TBD
Environmental
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: -40 to 75oC (-40 to 167oF)
Operating Humidity: 5% to 95% Non-condensing
Regulatory Approvals
EMI: FCC Part 15, CISPR (EN55022) class A, EN50121-4, EN50155(pending)
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950-1
Warranty: 5 years