IES-1062FX-SS-SC

Beschreibung

IES-1062FX-MM-SC
Industrial 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x100Base-FX, multi-mode, 2Km/1310nm, SC connector
IES-1062FX-SS-SC
Industrial 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x100Base-FX, single-mode, 30Km/1310nm, SC connector

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.

• IES-1080 provide 8x10/100Base-T(X) ports
• IES-1062GT provide 6x10/100Base-T(X) and 2x10/100/1000Base-T(X) ports
• IES-1062FX series provide 6x10/100Base-T(X) and 2x100Base-FX fiber ports
• IES-1062GF series provide 6x10/100Base-T(X) and 2x1000Base-X fiber ports
• Triple redundant DC power inputs of terminal block and power jack
• Support auto-negotiation and auto-MDI/MDI-X
• Support store and forw ard transmission
• Support flow control
• Warning system by relay output
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled

Spezifikation

Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6
Fiber Ports Number: 2
Fiber Ports Standard: 100Base-FX
Fiber Mode: Single-mode
Fiber Diameter (μm): 9/125 μm
Fiber Optical Connector: SC
Fiber Ports Specifications Typical Distance (km): 30 km
Wavelength (nm): 1310 nm
Max. Output Optical Power (dBm): -8 dBm
Min. Output Optical Power (dBm): -15 dBm
Max. Input Optical Power(Saturation): 0 dBm
Min. Input Optical Power (Sensitivity): -34 dBm
Link Budget (dB): 19 dB
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3z for 1000Base-X; IEEE 802.3ab for 1000Base-T; IEEE 802.3x for Flow control
MAC Table: 8192 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power Indicator: Green : Power LED x 3
Fault Indicator: Amber : Indicates unexpected events occurred
10/100Base-T(X) RJ45 Port Indicator: Green for port Link/Act. Amber for Duplex/Collision
10/100/1000Base-T(X) / Fiber Port Indicator: Green for port Link/Act. Amber for 100Mbps indicator
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power: Dual DC inputs: 12~48VDC on 6-pin terminal block
Power Consumption (Typ.): 8 watts
Overload Current Protection: Present
Reverse Polarity Protection: Present on terminal block
Physical Characteristics
Enclosure: IP-30
Dimensions (W x D x H): 26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.)
Weight (g): 680 g
Environmental
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: -40 to 70°C (-40 to 158°F)
Operating Humidity: 5% to 95% Non-condensing
Regulatory Approvals
EMI: FCC Part 15, CISPR (EN55022) class A,
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ): 323,065
Warranty: 5 years