News

Reliable Panel PC solution with True Flat PCAP Touch.

With the P156-10AI, another Panel PC from the P-series of ICP Germany comes onto the market, which is equipped with True Flat PCAP Touch Technology. The P156-10AI offers a 15.6" TFT-LC display with Full HD resolution (1920x1080) and 16.2 million colors at a color depth of 8 bit. The display delivers a brightness of 450 cd/m2 and a viewing angle stability of 170°/170°. The front offers IP65 protection and the airbonded 10-point True-Flat Projected Capacitve Touch Screen provides a crystal clear image. Anti-glare, anti-reflection and anti-bacterial coatings are optionally available. The cornerstone of the P156-10AI is the Thin-Mini-ITX Board PD10-AI, which is equipped with a dual core Intel® Apollo Lake-M CeleronTM N3350 with a maximum turbo frequency of 2.4 Ghz. Optionally, other processors such as the quad-core PentiumTM N4200 with a maximum 2.5GHz are also available. In terms of memory, the P156-10AI can be equipped with a maximum of 8GB DDR3L with 1867MHz clock frequency. On the I/O Shield, the motherboard provides two RJ45 Gigabit Ethernet ports with Intel® I211-AT network chips, one HDMI and one display port each for connecting additional displays and four USB3.0 interfaces. Furthermore two RS-232 interfaces and an eight bit...

Industrial Raspberry PI alternative.

If you have developed your prototype on a Raspberry basis and are now looking for an adequate replacement, you will find it in the ND108T from ICP Germany. The industrial PICO-ITX board with only 100x72mm size is delivered with an ARM Cortex A53 processor from the NXP i.MX8M family. Available are a Quad Core and a Dual Core with 1.5GHz as well as three memory sizes of 1GB, 2GB and 4GB LPDDR4 SDRAM with 1600MHz clock rate. The eMMC memory is delivered preloaded with 8Gb, 16GB or 32GB. The ND108T's memory can be expanded via a Micro SD card slot. In the basic version, ND108T comes with HDMI 2.0 with 4K resolution, GbE, two USB 3.0, one USB 2.0, one RS-232/422/485, and audio line-out and mic-in. A USB 2.0 OTG or the UART are also available for programming and debugging. In addition to the standard Mini-PCIe with PCIe and USB signal, a Raspberry PI* compatible 40 pin header with GPIO signal is available as an...

Expandable, fanless, high-performance - the new DIN rail PC. 

The expandable concept of the new fanless DIN-rail embedded PC DRPC-230-ULT5 from ICP Germany enables a wide range of applications.

The expandability of the DRPC-230-ULT5 is realized on the one hand by the PCIe expansion box, on the other hand by the internal power supply which is suitable for a variety of add-on cards. Thus, PoE cards of the GPOE series or AI accelerator cards of the Mustang series required for machine vision applications can be used. For automation applications DAQ cards, measurement cards, digital IO cards, etc. can be used.

The DRPC-230-ULT5 is available in three versions. The basic system is offered with an Intel® CoreTM i5-8365UE or a Celeron® 4205U processor of the 8th generation. The DRPC-230 is pre-equipped with 8GB DDR4 RAM, which can be expanded up to 32GB. The basic housing measures 190x150x81 mm and offers space for a 2.5" drive bay, a Mini-PCIe slot...

More PoE ports, less space requirements

Power over Ethernet (PoE) is playing an increasingly important role in machine vision, surveillance and access control. On the one hand, the number of PoE-capable devices is constantly increasing, while on the other hand, the technology enables simplified installation and lower installation costs.

The new Power over Ethernet expansion card GPOE-6P from ICP Germany completes the GPOE expansion card series. In addition to the existing 2 and 4 port solution, the GPOE-6P with 6 PoE ports can now be used. Compact in size of 170 x 107 mm, it has a PCI Express x4 interface and can be used in a variety of systems. The physical Ethernet interfaces are certified according to the IEEE 802.3at/bt standard and automatically detect PoE or non PoE capable devices.

The GPOE-6P offers a maximum...

Compact embedded system with triple HDMI image output

The IDS-310-AL digital signage embedded system from ICP Germany offers three advantages. Ultra-compact, low maintenance and a triple HDMI image output. The ultra-compact IDS-310-AL is offered in two housing variants. Variant one with 0.5 litre or 137x103x38 mm is equipped with a dual core Intel® Celeron® N3350 processor and offers a basic clock frequency of 1.1GHz, which can be increased to 2.4GHz. Variant two with 0.7 litre or 137x103x52 mm is equipped with a four-core Intel® Celeron® processor J3455 with 1.5GHz basic frequency and a turbo frequency of 2.3GHz. Both versions offer two GbE LAN, one adjustable RS-232/422/485...

SSD with multi-layer data protection.

Anyone who cares about their data relies on more than just a security solution. Local backup solutions, as offered by the company Waxar, or cloud solutions are one way to secure your data. However, if the PC is stolen, manipulated by third parties or disposed of, data must be protected in another way. In such a situation the new functions of the 2.5" M339 Solid State Disk series from ICP Germany can help. The multi-layer data protection of the new M339 series offers hardware-side adjustable write protection for the first time. If this is active, neither the operating system, a virus nor a DAU on the SSD can change data. Secondly, a quick delete function can also be activated on the hardware side. With this all data is irrevocably deleted within seconds. The highlight of the new SSD is the self-destruction. If activated on the hardware side, high voltage destroys all NAND Flash ICs irrevocably and irretrievably. On the one hand,..

Power off, data off?

Securing data loss In the event of a power failure, data can be lost quickly, boot sectors destroyed or entire systems paralysed. For protection of embedded systems, panel PCs or mainboards with DC voltage input the AUPS series ICP Germany is the ideal solution. The four models of the uninterruptible power supply are offered in a robust metal housing. The VESA adapters on both sides allow easy installation between the device to be protected and the actual VESA mount. One 60 Watt and one 100 Watt version with either 12 Volt DC or with a wide range voltage input from 9 to 36 Volt DC are available. The Li-Ion battery provides...

Flexibly expandable embedded system with 9th generation Core^TM I technology.

The new TANK-880-Q370 from ICP Germany combines many PCIe slots, many hard disk bays, many communication interfaces and a lot of CPU performance in its fanless 9.7 liter case.

The TANK-880-Q370 is offered in standard versions with an Intel® Core^TM i7-9700TE 8-core processor or an i5-9500TE 6-core processor and 8 GB DDR4 memory. The main memory can be expanded to a maximum of 64GB via two DDR4 SO-DIMM slots. The embedded system offers its users flexible expansion options through numerous PCI Express slots. One PCIe x16, two PCIe x4, one PCIe x1...

Panel PC with hygienic surface.

ICP Germany offers a new Panel PC especially for use in the medical environment. The housing is anti-bacterial, offers an IP65 front protection and a rear with IP32 protection. Cleaning and disinfection is easy to perform due to the design of the flat front panel and the housing. The fanless operation prevents unnecessary air turbulence and enables low-maintenance operation.

The POC-W24C offers sufficient space for image content due to its 24" display size and 1920x1080 resolution. The projected-capacitive touch allows interaction with the application software. The touch is optimized for the use of multilayer gloves and the detection of splash water and water drops. A passively cooled version with Intel® mobile ULT Core™ i7-6600U, i5-6300U or Celeron® 3855U is offered. The POC-W24C is equipped with 4GB DDR4 RAM as standard and can be extended up to 32GB. A 2.5" SATA drive bay and a Mini-PCIe mSATA interface are available for storage media. Furthermore, the Panel PC offers two GbE network interfaces, an HDMI...

Small embedded PC with AI computing power.

With the ultra compact ITG-100AI, ICP Germany offers an inference system that is prepared for use with dedicated neural network topologies (DNN).

On the hardware side, the two Intel® Movidius™ Myriad™ X VPU in the ITG-100AI offer excellent inference performance per watt, 16 SHAVES cores for AI calculations and native FP16 support. On the software side, the ITG-100AI supports Intel®'s open source toolkit "Open Visual Inference Neural Network Optimization" (OpenVINO™), providing end-to-end acceleration...