Description
IMC-P111FX-SS-SC-LV
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, 12~48VDC power inputs
IMC-P111FX-MM-SC-LV
Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, 12~48VDC power inputs
IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85OC and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments. IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.
IMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-111 series is reliable media converter and can satisfy most demand of operating environment.
• Designed for Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
• Leading EN50155-compliant Ethernet switch for rolling stock application
• Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
• Support Ethernet to fiber or Ethernet to SFP port
• Support LFP (Link Fault Pass-through) function
• Supports full/half duplex operationDIN-Rail and wall mounting enabled
• Supports store and forward transmission
• Supports relay output for power failed alarm
• Provided DIP-Switch to setting function
• High reliability and rigid IP-30 housing
• DIN-Rail and panel mounting enabled
Specification
- Physical Ports
- Port type
- 100Based-FX Multi-mode Port
- Fiber Ports Number
- 1
- Fiber Diameter (µm)
- 62.5/125 µm
- 50/125 µm
- Fiber Optical Connector
- SC
- Typical Distance (Km)
- 2 Km
- Wavelength (nm)
- 1310 nm
- Max. Output Optical Power (dbm)
- -14 dbm
- Min. Output Optical Power (dbm)
- -23.5 dbm
- Max. Input Optical Power (Saturation)
- 0 dbm
- Min. Input Optical Power (Sensitivity)
- -31 dbm
- Link Budget (db)
- 7.5 db
- WLAN interface
- Ethernet Standards
- IEEE 802.3 for 10Base-T
- IEEE 802.3u for 100Base-T(X) and 100Base-FX
- IEEE 802.3x for Flow control
- Processing
- Store-and-Forward
- DIP-Switch setting
- DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
- DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
- DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
- DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
- LED Indicators
- Power indicator
- Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line
- 10/100Base-T(X) RJ45 port indicator
- Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
- Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps
- Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
- 100Base-FX fiber port indicator
- Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
- Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
- LFP statue indicator
- Amber LED – (ON) LFP function fail / (OFF) LFP function disablem
- Fault Indicator
- Amber : Indicate unexpected event occurred
- Power
- Input power
- Triple DC inputs. 12~48VDC on 7-pin terminal block. 12~45VDC on power jack
- Power consumption (Typ.)
- TBD
- Overload current protection
- Present
- Reverse polarity protection
- Present on terminal block
- Physical Characteristics
- Enclosure
- IP-30
- Dimension (W x D x H)
- 52 (W) x 106.1 (D) x 144.3 (H)mm (2.05 x 4.18 x 5.68 inch)
- Weight (g)
- TBD
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory Approvals
- Power Automation
- IEC 61850-3, IEEE 1613
- EMI
- FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN50121-4
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Warranty
- 5 years
Filter criteria
- Manufacturer
- ORING
- Status
- Phased out
- Customs Tariff Number
- 85176200
- WEEE Number
- DE 76344510