Description
EN50155 8-port unmanaged PoE Ethernet switch with 8x10/100Base-T(X) P.S.E., M12 connector and 2xbypass included
ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TPS-1080-M12-BP2 is an un-managed PoE Ethernet switch with 8x10/100Base-T(X) P.S.E. (4 of these ports also double as 2 sets of bypass ports), which is specifically designed for the toughest and fully compliant with EN50155 requirement. TPS-1080-M12-BP2 also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TPS-1080-M12-BP2 switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TPS-1080-M12-BP2 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TPS-1080-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
● Leading EN50155-compliant Ethernet switch for rolling stock application
● Provide 8x10/100Base-T(X) PoE (P.S.E.) ports
● Supports IEEE 802.3at compliant PoE with maximum 30Watts per port
● Support dual power inputs for power redundancy
● Support auto-negotiation and auto-MDI/MDI-X
● Support store and forward transmission
● Support flow control
● Built-in 2 sets of bypass ports
● M12 connectors to guarantee reliable operation against environmental disturbances
● Rigid IP-40 housing design
● Wall mounting enabled
Specification
- Physical Ports
- 10/100 Base-T(X) Ports in M12 Auto MDI/MDIX with P.S.E.
- 8 x M12 connector (4-pin D-coding, bypass function included by last 4 ports)
- Technology
- Ethernet Standards
- IEEE 802.3 for 10Base-T
- IEEE 802.3u for 100Base-TX
- IEEE 802.3x for Flow control
- IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
- MAC Table
- 8K MAC addresses
- Processing
- Store-and-Forward
- LED Indicators
- Power Indicator
- Green : Power LED x 3
- Fault Indicatorr
- Amber : Indicate PWR1 or PWR2 failure
- 10/100Base-T(X) M12 port indicator
- Top for port Link/Act indicator. Green for 100Mbps link, Amber for 10 Mbps link
- and PoE indicator
- Middle Amber for Duplex / Collision indicator
- Bottom blue for PoE Injected indicator
- Fault contact
- Relay
- Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
- Power
- Redundant Input Power
- Dual DC inputs. 50~57VDC on 5-pin M23 connector
- Power Consumption (Typ.)
- 2.5 Watts (power consumption of P.S.E. is not
- included)
- PoE Output Power
- 240 Watts
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present
- Physical Characteristic
- Enclosure
- IP-40
- Dimension (W x D x H)
- 125 (W) x 65 (D) x196 (H) mm
- Weight (g)
- 1018 g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 70°C (-40 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
- EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Warranty
- 5 years
Filter criteria
- Ethernet
- Fast
- Ports in total
- 08
- Ports RJ45
- 00
- Ports SFP
- 00
- Ports Fiber
- 00
- POE
- P.S.E.
- Management
- unmanaged
- Manufacturer
- ORING
- Status
- Phased out
- Customs Tariff Number
- 85176200
- WEEE Number
- DE76344510