Description
Industrial 8-port slim type unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E.
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.
• Provides 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled
• Supports Jumbo frame up to 9KBytes
• Supports wide temperature -40~70 degree for harsh environment
• Supports 50~57VDC redundant power input and reply output
Specification
- Physical Ports
- 10/100/1000Base-T(X) Ports in RJ45 With P.S.E.
- 8
- Technology
- Ethernet Standards
- IEEE 802.3 for 10Base-T
- IEEE 802.3u for 100Base-TX
- IEEE 802.3ab for 1000Base-T
- IEEE 802.3x for Flow control
- IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
- MAC Table
- 2048 MAC addresses
- Processing
- Store-and-Forward
- LED Indicators
- Power Indicator
- Green : Power LED x 2
- Fault Indicator
- Amber : Indicate PWR1 or PWR2 failure
- 10/100/1000Base-T(X) RJ45 port indicator and PoE indicator
- Green for port Link/Act.
- Green for PoE power injected.
- Fault contact
- Relay
- Relay output to carry capacity of 1A at 24VDC
- DIP-Switch
- DIP-Switch 1
- Power-1 failed warning : (ON) enable, (OFF) disable
- DIP-Switch 2
- Power-2 failed warning : (ON) enable, (OFF) disable
- Power
- Redundant Input power
- Dual DC inputs. 50VDC on 6-pin terminal block.
- Power consumption (Typ.
- 8 Watts (power device not included)
- Overload current protection
- Present
- Reverse polarity protection
- NOT Present
- Physical Characteristic
- Enclosure
- IP-30
- Dimension (W x D x H)
- 26.1(W) x 94.9(D) x 144.3(H) mm
- Weight (g)
- 390 g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 70°C (-40 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- Warranty
- 5 years
Filter criteria
- Applications
- Building Automation
- Ethernet
- Gigabit
- Ports in total
- 08
- Ports RJ45
- 08
- Ports SFP
- 00
- Ports Fiber
- 00
- POE
- P.S.E.
- Management
- unmanaged
- Manufacturer
- ORING
- Status
- Phased out
- Customs Tariff Number
- 85176200
- WEEE Number
- DE76344510