Description
IGPS-1080-24V-I is an unmanaged Gigabit PoE Ethernet switch with P.S.E. function. IGPS-1080-24V-I supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080-24V-I support dual 24VDC power inputs and generates 50VDC P.S.E. power output per port. IGPS-1080-24V-I PoE switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
• IGPS-1080-24V-I provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with maximum 30Watts per port
• Supports Isolation protection
• Supports jumbo frame up to 9.6KBytes
• Supports dual 24VDC power inputs for power redundancy
• Supports auto-negotiation and auto-MDI/MDI-X
• Supports store and forward transmission
• Supports flow control
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled
Specification
- ORing Switch Model
- IGPS-1080-24V-I
- Physical Ports
- 10/100/1000Base-T(X) Ports in RJ45 With P.S.E.
- 8
- Technology
- Ethernet Standards
- IEEE 802.3 for 10Base-T,
- IEEE 802.3u for 100Base-TX
- IEEE 802.3ab for 1000Base-T
- IEEE 802.3x for Flow control
- IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
- MAC Table
- 4K MAC addresses
- Processing
- Store-and-Forward
- Jumbo Frame
- Up to 9.6KBytes
- LED Indicators
- Power Indicator
- Green : Power LED x 2
- Fault Indicator
- Amber : Indicate PWR1 or PWR2 failure
- 10/100/1000Base-T(X) RJ45 port indicator and PoE indicator
- Dual color LED for port Speed/Link/Act : Green for 1Gbps link/act, Amber for 10/100Mbps link/act Green for PoE power injected.
- DIP-Switch
- DIP-Switch 1
- Power-1 failed warning : (ON) enable, (OFF) disable
- DIP-Switch 2
- Power-2 failed warning : (ON) enable, (OFF) disable
- Fault contact
- Relay
- Relay output to carry capacity of 1A at 24VDC
- Power
- Redundant Input power
- Dual DC inputs. 24~36VDC on 6-pin terminal block.
- PoE output power
- 52 ~ 57VDC
- Power consumption (Typ.)
- 7.8 Watts
- Overload current protection
- Present
- Reverse polarity protection
- NOT Present
- Physical Characteristic
- Enclosure
- IP-30
- Dimension (W x D x H)
- 41(W) x 94.9(D) x 144.3(H) mm
- Weight (g)
- 452 g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 70°C (-40 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A, E-MARK
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Warranty
- 5 years
Filter criteria
- Ethernet
- Gigabit
- Ports in total
- 08
- Ports RJ45
- 08
- Ports SFP
- 00
- Ports Fiber
- 00
- POE
- P.S.E.
- Management
- unmanaged
- Manufacturer
- ORING
- Status
- Standard
- Customs Tariff Number
- 85176200
- WEEE Number
- DE76344510