Description
IES-2042FX-MM-SC
Industrial 6-port lite-managed Ethernet switch with 4x10/100Base-T(X) and 2x100Base-FX, multi-mode, 2Km/1310nm, SC connector
IES-2042FX-SS-SC
Industrial 6-port lite-managed Ethernet switch with 4x10/100Base-T(X) and 2x100Base-FX, single-mode, 30Km/1310nm, SC connector
IES-2060/2042FX series are lite-Managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) ports or 4x10/100Base-T(X) and 2x100Base-FX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2060/2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, these switch is one of the most reliable choice for easy managed Fiber Ethernet application.
• Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
• Open-Ring supports other vendor's ring technology in open architecture
• Multiple Redundant Ethernet technology RSTP/STP, O-Ring supported to protect your industrial network
• Provides Fast recovery technology for Ethernet multi-redundancy
• O-Chain support the multiple redundant ring technology
• SNMP v1/v2c/v3 ,http server, telnet server support
• Supports LLDP protocol
• Configurable by Web-based and Windows utility (Open-Vision)
• Event notification through Syslog, Email, and SNMP trap
• Two 100Base-FX fiber ports support for long distance connection
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled
Specification
- Physical Ports
- Fiber Ports Number
- 2
- Fiber Ports Standard
- 100Base-FX
- Fiber Mode
- Single-mode
- Fiber Diameter (μm)
- 9/125 μm
- Fiber Optical Connector
- SC
- Fiber Ports Specifications Typical Distance(km)
- 30 km
- Wavelength (nm)
- 1310 nm
- Max. Output Optical Power (dBm)
- -8 dBm
- Min. Output Optical Power (dBm)
- -15 dBm
- Max. Input Optical Power (Saturation)
- 0 dBm
- Min. Input Optical Power (Sensitivity)
- -34 dBm
- Link Budget (dB)
- 19 dB
- 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
- 4
- Technology
- Ethernet Standards
- IEEE 802.3 for 10Base-T
- IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control
- IEEE 802.1D for STP (Spanning Tree Protocol)
- IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
- IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
- MAC Table
- 2048 MAC addresses
- Priority Queues
- 4
- Processing
- Store-and-Forward
- Switch Properties
- Switching bandwidth : 1.2Gbps
- VLAN : Port Based
- Security Feature
- Enable/disable ports
- VLAN to segregate and secure network traffic
- Software Features
- STP/RSTP (IEEE 802.1D/w)
- Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
- DHCP Client
- Port base VLAN
- LLDP (Link Layer Discovery Protocol)
- Port configuration, status, statistics, monitoring, security
- SNMP v1/v2c/v3 and private MIB support
- Network Redundancy
- O-Ring
- Open-Ring
- O-Chain
- STP
- RSTP
- Fast recovery
- Warning / Monitoring System
- Relay output for fault event alarming
- Syslog server / client to record and view events
- Include SMTP for event warning notification via email
- Event selection support
- LED Indicators
- Power Indicator
- Green : Power LED x 3
- Fault Indicator
- Amber : Indicates unexpected events occurred
- R.M. Indicator
- Green : Indicates that the system is operating in O-Ring Master mode
- O-Ring Indicator
- Green : Indicates that the system is operating in O-Ring mode
- 10/100Base-T(X) RJ45 Port Indicator
- Green for port Link/Act. Amber for Duplex/Collision
- 100 Base-FX Fiber Port Indicator
- Green for port Link / Act Amber for 100Mbps indicator
- Fault contact
- Relay
- Relay output to carry capacity of 1A at 24VDC
- Power
- Redundant Input Power
- Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
- Power Consumption (Typ.)
- 7 watts
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present on terminal block
- Physical Characteristics
- Enclosure
- IP-30
- Dimensions (W x D x H)
- 52(W)x106.1(D)x144.3(H) mm
- Weight (g)
- 670 g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 70°C (-40 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory Approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A,
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )
- 346,491
- Warranty
- 5 years
Filter criteria
- Applications
- Building Automation
- Ethernet
- Fast
- Ports in total
- 06
- Ports RJ45
- 04
- Ports SFP
- 00
- Ports Fiber
- 02
- Management
- lite managed
- Manufacturer
- ORING
- Status
- Standard
- Customs Tariff Number
- 85176200
- WEEE Number
- DE76344510