Description
Industrial 1-port secure serial to IEEE 802.11 b/g wireless device server with 1xRS-232/422/485 and 1x10/100Base-T(X)
IDS-5011-WG is an innovative secure 1-port RS232/422/485 to 802.11b/g WLAN, up to 54Mbps, and 1-port LAN device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5011-WG can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5011-WG features HTTPS, SSH, SSL encryption, and 802.1X to assure the security of critical data transmission.
IDS-5011-WG supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation. With wide operating temperature, -10~65°C, and rugged IP-30 housing design, IDS-5011-WG could operate in the harsh industrial environment. Therefore, IDS-5011-WG is the best solution to the high demand of secure serial to WLAN critical data communication.
• High Speed Air Connectivity : WLAN interface support up to 54Mbps link speed
• Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
• Redundant multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client mode 4 IP; ranges : UDP
• NAT Pass-Through : the user can manage IDS-5011-WG through NAT router
• High Security Capability : SSL data encryption ; secured management by HTTPS and SSH ; IP Access : IP; White List ; wireless : WEP/WPA/PA2/802.1X/TKIP
• Internet Communication : PPPoE authentication
• Update DNS Hostname : DDNS
• Event Warning by Syslog, Email, SNMP trap, and Beeper
• Configurable by Web-based and Windows utility (DS-Tool)
• Various Windows O.S. supported : Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)
Specification
- Physical Ports
- 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX
- 1
- WLAN interface
- WLAN Standard
- IEEE802.11b/g
- Operating Mode
- Client mode
- Antenna and Connector
- 2dBi antenna on reversed SMA connector
- Radio Frequency Type
- DSSS, OFDM
- Modulation
- IEEE802.11b : CCK, DQPSK, DBPSK
- IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
- Frequency
- America/FCC : 2.412~2.462 GHz (11 channels)
- Europe CE/ETSI : 2.412~2.472 GHz (13 channels)
- Transmission Rate
- IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
- IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
- Transmit Power
- IEEE802.11b/g : 16dBm
- Receiver Sensitivity
- -81dBm @ 11Mbps, PER< 8%
- -64dBm @ 54Mbps, PER< 10%
- Encryption Security
- WEP : (64-bit ,128-bit key supported)
- WPA / WPA2 :IEEE802.11i(WEP and AES encryption)
- WPA-PSK (256-bit key pre-shared key supported)
- TKIP encryption
- 802.1X Authentication supported
- Serial Ports
- Connector
- DB9(male) x 1
- Operation Mode
- RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
- Serial Baud Rate
- 110 bps to 230.4 Kbps
- Data Bits
- 5, 6, 7, 8
- Parity
- odd, even, none, mark, space
- Stop Bits
- 1, 1.5, 2
- RS-232
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- RS-422
- Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (4-wire)
- Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (2-wire)
- Data+, Data-,GND
- Flow Control
- XON/XOFF, RTS/CTS, DTR/DSR
- Network Features
- Network Protocols
- ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
- LED Indicators
- Power Indicator
- PWR 1(2) / Ready :
- Red On : Power is on and booting up.
- Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
- Green On : Power is on and functioning Normally.
- Green Blinking : Located by Administrator.
- 10/100Base-T(X) RJ45 Port Indicator
- Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
- WLAN Indicator
- Green for WLAN Link /ACT
- Serial TX / RX LEDs
- Red : Serial port is receiving data
- Green : Serial port is transmitting data
- Power
- Redundant Input Power
- Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack
- Power Consumption (Typ.)
- 5 watts
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present on terminal block
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -10 to 65°C (14 to 149°F)
- Operating Humidity
- 5% to 95% Non-condensin
- Regulatory Approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A,
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Warranty
- 3 years
Filter criteria
- Manufacturer
- ORING
- Status
- Phased out
- Customs Tariff Number
- 85176200
- WEEE Number
- DE 76344510