Description
EN50155 Dual-RF in IEEE 802.11 a/b/g and 802.11 b/g wireless access point with 2x10/100Base-T(X), M12 connector
ORing’s TransporterTM series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TAP-3120-M12 is a reliable IEEE802.11 a/b/g and 802.11b/g WLAN Access Point with 2 ports LAN which is fully compliant with EN50155 certification. TAP-3120-M12 access point use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TAP-3120-M12 provides dual-RF wireless interfaces, which can provide IEEE 802.11 a/b/g and 802.11b/g dual band wireless communication and can be applied to fulfill any demands of wireless applications. TAP-3120-M12 can be configured to operate in Dual AP/Dual Client/Bridge/AP-Client mode. TAP-3120-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. You are able to configure TAP-3120-M12 by WEB interface via LAN port or WLAN interface. Therefore, TAP-3120-M12 is one of the most reliable choices for rolling stock applications on the wireless network.
• Leading EN50155-compliant wireless access point for rolling stock application
• Dual high Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
• Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
• Support X-Roaming < 100 ms
• Support wireless load balance
• Support Dual AP/Dual Client/Bridge/AP-Client Mode
• Provide dual-RF which support IEEE 802.11 a/b/g and 802.11 b/g dual band for wireless communication
• Dual redundant Ethernet ports support Ethernet redundant mode (Recovery time < 10ms) and switch mode in M12 connector (D-coding)
• Wireless connecting status monitoring
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap and Relay output
• Ultra rugged enclosure for toughest industrial usages
• Wall mounting enabled
Specification
- Physical Ports
- 10/100Base-T(X) Ports in M12 Auto MDI/MDIX
- 2 (4-pin M12 connetor – D-coding)
- WLAN Interface
- Operating Mode
- Dual AP/Dual Client/Bridge/Repeater/AP-Client
- Antenna and Connector
- 4 x 2 dBi (b/g mode) / 3dBi (a mode) on Reverse SMA connector
- Radio Frequency Type
- DSSS, OFDM
- Modulation
- IEEE802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAM
- IEEE802.11b: CCK, DQPSK, DBPSK
- IEEE802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
- Frequency Band
- America / FCC: 2.412~2.462 GHz (11 channels)
- 5.15 to 5.825 GHz (13 channels)
- Europe CE / ETSI: 2.412~2.472 Ghz (13 channels)
- 5.15 to 5.724 GHz (19 channels)
- Transmission Rate
- IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
- IEEE802.11a/g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
- Transmit Power
- IEEE802.11a/b/g : 20dBm max
- Receiver Sensitivity
- 802.11a: -77dBm±2.0dB @ 54Mbps, PER< 10%
- 802.11b: -86dBm±1.5dB @ 11Mbps, PER< 8%;
- 802.11g: -78dBm±1.5dB @ 54Mbps, PER< 10%
- Encryption Security
- WEP : (64-bit ,128-bit key supported)
- WPA / WPA2 : 802.11i(WEP and AES encryption)
- WPA-PSK (256-bit key pre-shared key supported)
- 802.1X Authentication supported
- TKIP encryption
- Wireless Security
- SSID broadcast disable
- Protocol Support
- Protocol
- ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, STP (IEEE 802.1D)
- LED Indicators
- Power Indicator
- 2 x LEDs, Green for Power Indicator
- 10/100Base-T(X) Port Indicator
- 2 x LEDs, Green for port Link/Act at 100Mbps, Amber for port Link/Act at 10Mbps
- WLAN LEDs
- 2 x LEDs, Green for WLAN 1 and WLAN 2 Link/Act
- Fault Indicator
- 1 x LED, Red for Ethernet link down or power down indicator
- Fault contact
- Relay
- Relay output to carry capacity of 3A at 24VDC(5-pin M12 A-Coding)
- Power
- Redundant Input Power
- Dual Power Inputs. 12~48 VDC on 5-pin M23 connector (24 VDC Typ.)
- Power Consumption (Typ.)
- 8.3W
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present
- Physical Characteristic
- Enclosure
- IP-40
- Dimension (W x D x H)
- 125(W) x 65(D) x 196(H) mm (4.92 x 2.56 x 7.72 inch.)
- Weight (g)
- 1015g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -20 to 70°C (-4 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2)
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27, EN61373
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6 , EN61373
- Safety
- EN60950-1
- Warranty
- 3 years
Filter criteria
- Applications
- Fleetmanagement/Logistics
- Manufacturer
- ORING
- Status
- Phased out
- Customs Tariff Number
- 85176200
- WEEE Number
- DE 76344510