Description
• 10/100BaseT Ethernet Modbus TCP interface
• 16 optically isolated inputs
• 16 open collector outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• Includes four 3/4 inch metal standoffs with nuts
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
Monitor and control 16 optically isolated inputs and 16 open-collector outputs via any Ethernet connection with the SeaI/O-530E-OEM. Inputs can range from 5-30VDC, while the open-collector outputs provide high current sinking over a large operating voltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Inputs are grouped into four-bit segments. Each group shares a common for easy wiring via removable 3.5mm terminal blocks. Outputs are grouped in eight-bit ports which share high and low voltage inputs.
The SeaI/O-530E-OEM is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.
Communicate with the SeaI/O-530E-OEM using industry-standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.
The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development.
Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.
Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
Specification
- Family
- SeaI/O
- Output Dissipation
- Max. 1000mA (single), Max. 2000mA (port)
- RoHS Compliant
- Yes
- Power Requirement
- 9-30 VDC @ 2.9W
- # of Ports
- 16/16
- Output Voltage
- Max. 60VDC
- Output Type
- Open-Collector
- Output Power
- DC 60W max.
- Output Isolation
- 2500VAC RMS, 3500VDC
- Operating Temperature
- -25°C to 85°C (-13°F to 185°F)
- Digital I/O
- Isolated Inputs, Open-Collector Outputs
- Number of Inputs/Outputs
- 16 Inputs / 16 Outputs
- Host Interface(s)
- Ethernet
- Input Impedance
- 6.2K Ohms (in series)
- Input Range
- 5-30 VDC
- Input Isolation
- 2500VAC RMS, 3500VDC
- Humidity Range
- 10 – 90% Relative Humidity, Non-Condensing
- Extended Temperature
- Call for Options
- Dimensions
- 7.5 (L) x 5.0 (W) x 0.8 (H)
- Storage Temperature
- -50°C to 105°C (-58°F to 221°F)
Filter criteria
- Isolation
- yes
- Host Interface
- Ethernet
- Input protocol
- ModbusTCP
- Digital Out
- 16
- Digital In
- 16
- Manufacturer
- SEALEVEL
- Status
- New
- Customs Tariff Number
- 85176200
- WEEE Number
- DE 76344510