Description
It's a fact that the PC hardware and software may fail. To prevent the failure,many different solutions are proposed. However, none of these solutions offer a 100% assurance. Since it's hard to prevent the failure, to detect the failure becomes more and more important. The WDT-03 is used to detect the failure of the software and hardware. It can be used to reduce the risk of PC failure. The WDT-03 is useful even for those systems with built-in watchdog circuit.
The WDT-03 is equipped with two RS-232 ports, one is master port and another one is slave port. The master RS-232 port is designed to communicate with the local host-PC. The local host-PC can enable/disable/refresh/read-back the watchdog timer through the master RS-232 port. The slave RS-232 is used to send information to the remote Host-PC for monitoring. SO the remote HOST will get information immediately if the local host-PC has any software or hardware problem, even the power is failure
● Watchdog timer: Software enable/disable watchdog timer; Form 0.03 second to 1966.05 seconds
● Bus Voltage monitoring : 3.3V , 5V , 12V , -5V , -12V
● Fan Speed monitoring : 3 channels
● Temperature monitoring : 3 channels
● EEPROM: 63 bytes for user read/write, read/write cycles : 100,000 times
● Interface: RS-232 x 1 for local CPU; RS232 X1 for remote HOST(monitor the local CPU)
● Baud rate : 2.4K/4.8K/9.6K/19.2K/38.4K/57.6K/115.2K
● BPS Programmable
● Data format : N81
● Command format : the 7000 family compatible
● Power good signal for PC system
● Reset signal to simulate external reset-key pressed
● ISA/PCI bus for PC
● Four through-hole mounting for any system with RS-232 interface
● Power Consumption : 2W
● Software : Support DOS, 95/98/Me/2000/NT driver
Filter criteria
- Card Form Factor
- ISA
- RS-232
- 02
- Manufacturer
- ICPDAS
- Status
- Phased out
- Customs Tariff Number
- 84733020
- WEEE Number
- DE76344510